2025 Exmark Vertex X-Series VXX999EKA60600

Information

2025 Exmark Vertex X-Series VXX999EKA60600

Product Overview

Designed to raise the bar for stand-on mower performance and productivity, Vertex X-Series uses the same formed and welded tubular steel frame and heavy-duty 15-inch casters as our premier Lazer Z zero-turn riding mowers. With carbureted Kawasaki FX1000 engines, you'll have the power to finish jobs faster, with a better quality of cut thanks to our unmatched UltraCut cutting decks. One look and it's easy to see why the Vertex X-Series is the next generation of stand-on mowers.

Features may include:

Professional Productivity
  • When equipped with the 72-inch UltraCut Series 6 cutting deck, Vertex X-Series can cut more than seven acres per hour, with Exmark’s signature quality of cut. Adjust cut height quickly and easily from 1.5- to 5.0-inches with the single-point height of cut adjustment system. And with 14-gallons of fuel capacity, Vertex X-Series delivers maximum runtime between fill-ups.
Operator Focused Design
  • The Vertex X-Series optimizes operator comfort with bolstered operator pad and suspended operator platform located low and centered between the rear wheels. When combined with the easy-to-use dual-action controls, you’ll feel balanced and in control of any situation.
Engineered for Low Maintenance
  • We engineered Vertex X-Series to run all season without maintenance, virtually eliminating productivity killing in-season downtime. And when it’s time for maintenance, we’ve made it easy to do with features including a magnetic operator pad that’s removable without tools, and an open architecture that enables easy access to the engine and hydro drive system.
Wide, Stable Design
  • The Vertex X-Series is designed with a wide stance for increased stability. Large 24-inch drive tires provide increased traction and ride quality, with reduced turf compaction. Heavy-duty 15-inch casters with semi-pneumatic caster tires deliver unmatched stability and durability.

Photos

Highlights

  • Thomasville, Georgia
  • 2025
  • Exmark
  • Vertex X-Series VXX999EKA60600
  • Model: FX1000V | Series: V-Twin
  • Hydrostatic | Speeds: Infinitely Variable | Brand: Hydro-Gear
  • Gas EFI
  • Available
  • 72.87"
  • 48.75" | Cutting: 1.5" to 5.0" in 0.25" increments.

    • Specifications

    • 2025
    • Exmark
    • Vertex X-Series
    • VXX999EKA60600
    • Stand-On
    • Model: FX1000V | Series: V-Twin
    • Kawasaki
    • 38.5 hp
    • 999 cc
    • 3,600 rpm
    • Heavy-duty canister air filtration system
    • Electric
    • Electronic Fuel Injected
    • Gas EFI
    • Engagement: Warner 250 ft-lb clutch
    • Hydro-Drive | Two Hydro-Gear 16 cc pumps powering two Hydro gear 17.8 cubic inch motors.
    • Control: Twin levers with center fixed reference bar for ease of control forward and reverse
    • Hydrostatic | Speeds: Infinitely Variable | Brand: Hydro-Gear
    • Lever-actuated internal motor brake
    • 15 x 6.0-6, smooth-tread, semipneumatic tires with tapered roller bearings. | Drive Wheel Release: Allows unit movement without engine running.
    • 24 x 12-12 Hoosier Grass Master
    • 12-volt battery with 30-amp alternator.
    • Infinitely variable speed selection 0–12.0 mph forward, 0–5.0 mph reverse
    • Blade: Approximately 18,500 fpm.
    • 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt
    • 72.87"
    • Deck: 60"
    • 73.36" | 3 Blades at 20.50" Length
    • 48.75" | Cutting: 1.5" to 5.0" in 0.25" increments.
    • 7.75 cutter / 1.75 blade / 1.0" diameter shaft.
    • 14-gallon dual fuel tanks on RH and LH side
    • Curb: 1310 lbs.
    • UPC: 193308240688 | Fuel Indicator: Float gauge
    • Style: Full-floating UltraCut Series 6. Side discharge standard, with molded discharge chute and option to bag or mulch. | Tractor Frame: Welded, heavy-duty 1.5" x 3.0" tubular steel. | Lift: Single point HOC; with mechanical lift-assist springs.